AUTOMATIC TANK AND TOTE WASHER
FIXED TANK WASH SYSTEM (FOR MOVABLE TANKS AND TOTES)
These systems are designed to wash round tanks of up to 60 inches in diameter, and tote tanks of up to 48 inches diameter or square, in both solvent and aqueous applications. The container is placed under a hydraulically operated wash head assembly which is tightly placed over the top tank opening. The wash head is equipped with both a high pressure rotating spray wand assembly and a low pressure rinse ring. A wash, pause and rinse cycle is automatically executed under the control of a programmable logic controller (PLC).
The wash cycle re circulates the solvent (or water) from a dirty solvent tank. The rinse cycle can either re circulate to a clean solvent tank, or draw from a clean solvent source and discharged to the dirty solvent tank.
|
TW-500 with Tilting Base
|
Result from a 20 minute wash of totes containing cured traffic pain
|
High Pressure Pump |
STANDARD FEATURES 
- Stainless steel construction
- Movable bridge assembly with screw jack mechanism
- Tank cover with aluminum exterior and solvent resistant membrane interior
- Spring loaded securing mechanism for a vapor tight tank cover fit
- Class 1, Div 1 proving switches for high level, lid secure and grounding
- High-pressure spray wash system
- Stainless steel rinse ring with 5 GPM spray nozzles
- Pneumatically driven rotary spray system of hardened 316 stainless steel
- Solvent compatible high pressure wash pump and fittings to 40 GPM at 350 PSI
- Rinse pump, Teflon fitted for solvent compatibility
- Solvent return pump, Teflon fitted for solvent compatibility
- Microprocessor Controller (PLC) in NEMA 4X Enclosure
- Operator terminal with 4-line display
- Pre-wired for field installation
OPTIONS
- High pressure pump for wash flows at up to 50 GPM and 600 psi
- Air Purge for NEMA 4X Enclosure for Explosion Rating
- Purge system (N2 or CO2) for the tank or tote being washed
- Hydraulically operated tilting base (10' X 6') for flat bottom tank drainage
- Dual function wash head (for openings of totes 16"-24" & tanks 36"-68"
|
|
|
