These systems are designed to wash a wide variety of containers ranging from movable mixing tanks, totes drums and 5 gallon pails, and an assortment of other container configurations, in both solvent and aqueous applications. The containers and/or parts are placed in a series of pre-engineered cart configurations, which are then inserted in an enclosed wash chamber. Wash nozzles are located so as to wash both the interior and (optionally) exterior surfaces. A wash, pause and rinse cycle is automatically executed under the control of a programmable logic controller (PLC).

The wash cycle re circulates the solvent (or water) from a dirty solvent tank. The rinse cycle can either re circulate to a clean solvent tank, or draw from a clean solvent source and discharged to the dirty solvent tank.

• 304 S.S. brushed exterior and all 304 stainless steel interior
• Non sparking aluminum grated floor
• Internal gradient sump with level sensors
• Hinged door with view window with safety switch
• Vapor tight seals to control fugitive VOC emissions
• NEMA 4 electrical components and grounding clamp
• Air, Nitrogen or CO2 purge valve
• Exhaust port
• High pressure pump and valves to 350 PSI @ 140 gpm
• Rinse pump and valves
• Scavenger pump and valves
• Microprocessor Controller (PLC) in NEMA 4X Enclosure
• Operator terminal with color touch screen display
• Pre-wired for field installation
• Wash chamber dimensions: approximately 8' x 8' x 12'

• Nozzle assemblies and pump (to 350 psi @ 140 gpm) to wash exterior surfaces
• Air Purge for NEMA 4X Enclosure for Explosion Rating (includes all wiring)
• Exhaust fan with Class 1, Division 1 motor and non-sparking impeller with stainless steel internal ducting
• Visual status indicator light system (PLC controlled)
• Refrigerated vapor condenser to -40 degrees F for VOC control
• Blow-out panel (to be ducted to an outside area)
• Drying and vapor recovery cycles for alternative solvents

The MW-1000 features a high performance solvent pumping system consisting of a wash pump for interior wash and a second for exterior wash, a rinse pump and a high volume return pumping system. All components are readily accessible, including a sump drain area equipped with a strainer for easy maintenance.

• Washer assembly for totes and tanks with bottom drains