UNIVERSAL AUTOMATIC WASHER
DRUMS - PAILS - PRINTING PRESS COMPONENTS - PARTS |
MW-200 |
These systems are designed to wash a wide variety of containers ranging drums and 5 gallon pails, cans and an assortment of items and printing press components, in both solvent and aqueous applications.
The containers and/or parts are placed in a series of pre-engineered cart configurations, which are then inserted in an enclosed wash chamber. Wash nozzles are located so as to wash both the interior and (optionally) exterior surfaces. A wash, pause and rinse cycle is automatically executed under the control of a programmable logic controller (PLC).
The wash cycle re circulates the solvent (or water) from a dirty solvent tank. The rinse cycle can either re circulate to a clean solvent tank, or draw from a clean solvent source and discharged to the dirty solvent tanks. |
MW-200 washer, storage tank a distillation system in a closed loop configuration. |
 STANDARD FEATURES
- 304 S.S. brushed exterior and all 304 stainless steel interior
- Non sparking aluminum grated floor
- Internal gradient sump with level sensors
- Hinged door with view window with safety switch
- Vapor tight seals to control fugitive VOC emissions
- NEMA 4 electrical components
- Air, Nitrogen or CO2 purge valve
- Exhaust port
- High pressure pump and valves to 350 PSI @ 50 gpm
- Rinse pump and valves
- Scavenger pump and valves
- Microprocessor Controller (PLC) in NEMA 4X Enclosure
- Operator terminal with touch screen display
- Pre-wired for field installation
- Wash chamber dimensions: approximately 5'W x 6'H x 8'D
 OPTIONS
-
Nozzle assemblies and pump (to 350 psi @ 50gpm) to wash exterior surfaces
-
Air Purge for NEMA 4X Enclosure for Explosion Rating (includes all wiring)
-
Exhaust fan with Class 1, Division 1 motor and non-sparking impeller with stainless steel internal ducting
-
Visual status indicator light system (PLC controlled)
-
Refrigerated vapor condenser to -40 degrees F for VOC control
-
Blow-out panel (to be ducted to an outside area)
-
Drying and vapor recovery cycles for alternative solvents
|
| The MW-200 features a high performance solvent pumping system consisting of a wash pump for interior wash and a second for exterior wash, a rinse pump and a high volume return pumping system. All components are readily accessible, including a sump drain area equipped with a strainer for easy maintenance. |
STANDARD CART ASSEMBLIES
- Drum wash cart assembly (for 3 drums) includes 3 wash nozzles
|
|
|
- Pail wash cart assembly for (12) 5 gallon pails or (9) 10 gallon pails (not shown)
|
|
|
- Wash cart for printing press components
|
|
|
CLOSED LOOP SYSTEM
When used in a closed loop configuration with an SRS automatic distillation system and a dual function solvent tank, as shown, the MW-200 offers optimal versatility, safety and efficiency in most industrial cleaning applications.
|
|
|
