UNIVERSAL AUTOMATIC WASHER
W-1000 washer
|
Quality automatic washers, totes drums, pail washers, press component parts & mixing tanks.
These systems are designed to wash a wide variety of containers ranging from movable mixing tanks, totes drums and 5 gallon pails, and an assortment of other container configurations, in both solvent and aqueous applications. The containers and/or parts are placed in a series of pre-engineered cart configurations, which are then inserted in an enclosed wash chamber. Wash nozzles are located so as to wash both the interior and (optionally) exterior surfaces. A wash, pause and rinse cycle is automatically executed under the control of a programmable logic controller (PLC).
The wash cycle re circulates the solvent (or water) from a dirty solvent tank. The rinse cycle can either re circulate to a clean solvent tank, or draw from a clean solvent source and discharged to the dirty solvent tank. |
|
|
|
STANDARD FEATURES
- 304 S.S. brushed exterior and all 304 stainless steel interior
- Non sparking aluminum grated floor
- Internal gradient sump with level sensors
- Hinged door with view window with safety switch
- Vapor tight seals to control fugitive VOC emissions
- NEMA 4 electrical components and grounding clamp
- Air, Nitrogen or CO2 purge valve
- Exhaust port
- High pressure pump and valves to 350 PSI @ 140 gpm
- Rinse pump and valves
- Scavenger pump and valves
- Microprocessor Controller (PLC) in NEMA 4X Enclosure
- Operator terminal with color display
- Pre-wired for field installation
- Wash chamber dimensions: approximately 8' x 8' x 8'
|
OPTIONS
- Nozzle assemblies and pump (to 350 psi @ 140 gpm) to wash exterior surfaces
- Air Purge for NEMA 4X Enclosure for Explosion Rating (includes all wiring)
- Exhaust fan with Class 1, Division 1 motor and non-sparking impeller with stainless steel internal ducting
- Visual status indicator light system (PLC controlled)
- Refrigerated vapor condenser to -40 degrees F for VOC control
- Blow-out panel (to be ducted to an outside area)
- Drying and vapor recovery cycles for alternative solvents z
|
| The MW-1000 features a high performance solvent pumping system consisting of a wash pump for interior wash and a second for exterior wash, a rinse pump and a high volume return pumping system. All components are readily accessible, including a sump drain area equipped with a strainer for easy maintenance. |
STANDARD CART ASSEMBLIES
- Washer assembly for totes and tanks with bottom drains
|
|
|
- Wash cart for tanks with no bottom drains
|
|
|
- Drum wash cart assembly (for 4 drums) includes 4 wash nozzles
|
|
|
- Pail wash cart assembly for (16) 5 gallon pails or (9) 10 gallon pails (shown)
|
|
|
- Wash cart for printing press components
|
|
|
|
|
CLOSED LOOP SYSTEM
When used in a closed loop configuration with an SRS automatic distillation system and a dual function solvent tank, as shown, the MW-1000 offers optimal versatility, safety and efficiency in most industrial cleaning applications.
|
|
|
